fusing sleeve part i have is D2424042 is there another part # ?
i cant seem to find this in my suppliers
fusing sleeve part i have is D2424042 is there another part # ?
i cant seem to find this in my suppliers
found it as D2424041 not 42
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
its oem as far as i can tell, i ordered oem sleeve and lower roller always replace these together,
toner is oem, i just can see failure at 60k-70k impressions,,, but who knows..
update on double imaging
the toner was some crap aftermarket toner, dont know who put that in or how it got in the machine, i suspect someone swapped out a oem for a compatable...
i switched out ran about 300 copies, first few had slight shadow but then it went away, the fuser is popping a bit after the copies have been generated is there a setting for this? rotation after the job?
, i suspect someone took the NEW fuser with 40k on it and put a used fuser in it at the warehouse where i bought the machine
this is common among thieves and copier guys...
thanks for the help
Bookmarks