Ricoh Pro C5100s close self checking

[idea-design]

hi，guys！how to close self checking after Energy saving mode，does anyone know？lot thanks

[copier tech]

hi，guys！how to close self checking after Energy saving mode，does anyone know？lot thanks

You can disable is service mode I guess you want to speed up the warm up process?

However you may run into issues by doing this.

[idea-design]

You can disable is service mode I guess you want to speed up the warm up process?

However you may run into issues by doing this.

yes，and self checking will waste a lit toner。
disable service mode，how can do it？need enter sp mode ？enter code？

[copier tech]

yes，and self checking will waste a lit toner。
disable service mode，how can do it？need enter sp mode ？enter code？

Have a read of the service manual.

Also update your firmware that will improve the first copy out time.

[slimslob]

yes，and self checking will waste a lit toner。
disable service mode，how can do it？need enter sp mode ？enter code？

It is most likely in Factory Service mode as I do not see it in regular SP in the service manual. You need to set it to only run Process Control if it has not been run within the last 24 hours.