Thanks: 
Likes: hello everyone can we do rotating printing with a ricoh im c3000 and a mac?
thank you
if so how can this be done in the print driver?
Dislikes: 0
hello everyone can we do rotating printing with a ricoh im c3000 and a mac?
thank you
if so how can this be done in the print driver?
Does the device have the optional PostScript unit installed?
If yes, check in driver
If no, chances are you can't because the generic PCL driver has almost no features.
Sent from my WAS-LX1 using Tapatalk
yes she has the postscript card + Drivers PS.
and the finisher is a SH3080and the finisher is a SH3080
If the device has the PS installed and the Mac has a PS driver installed the option must be in driver somewhere. We are both talking about rotating sort though right?Originally Posted by diable69BG
Also make sure you actually have 1 tray LEF and one tray SEF of same paper size and type for rotate sort
Sent from my WAS-LX1 using Tapatalk
Make sure you have the Ricoh PPD for that machine on the MAC. Don't use the native driver that the MAC offers because it won't show all the options. There is a lot of good info here on the CTN site that will guide you on how to load and configure the PPD correctly. If it can be done on a PC it can be done on a MAC.
Good luck
Is the finisher listed in the device options of the PostScript driver on the Mac?
Most problems with finishing I see come from the correct options not being added in the driver settings so as far as the driver is concerned there's no finisher or high capacity tray, etc.
Sent from my BlackBerry using Tapatalk
Reply With Quote
Bookmarks