Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2018
    Posts
    72
    Rep Power
    0

    mp5055 bad quaity

    the counter is 2500 only,i have changed pcu,trnasfer roller,fusing unit,and clean the glass of lazer unit,please check the outputWhatsApp Image 2021-07-13 at 3.28.12 PM.jpg

    https://we.tl/t-mzTiNmvgj5

    ps: portrait and landscape same rsult.

    thanks alot

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: mp5055 bad quaity

    Toner saver?

  3. #3
    Service Manager 1,000+ Posts
    mp5055 bad quaity

    FrohnB's Avatar
    Join Date
    Jul 2017
    Location
    Nebraska, USA ------ GO BIG RED
    Posts
    1,919
    Rep Power
    126

    Re: mp5055 bad quaity

    Uh Oh! Looks like someone may have forgotten or didn't know how to do the initial set up for this series.

    When you first turn it on, you MUST have the front door open, otherwise the machine starts a "normal toner supply" which doesn't fill the development unit properly.

    -When the machine is Very first started, you want the front cover open,
    -then you enter SP mode and go to SP 3-510-031 and set that to "1".
    -Exit out of SP mode, and THEN close the front cover. Machine starts initializing.
    -Once that's finished, you need to get back into SP mode, and go to SP 3-011-001 (Manual ProCon), and press "Execute".
    -Exit out of SP mode.


    Note if the initial toner supply has not been performed.
    If you start printing without executing the initial toner supply at installation, the machine goes to the toner end condition even if the machine has plenty of toner in the toner bottle.
    Do the following procedure to per
    form the toner end recovery if the machine has entered the toner end condition.
    1.Open the front cover for five seconds or more.
    2.
    Make sure that the toner bottle is set properly.
    3.Close the front cover.
    4.The toner end recovery automatically starts
    Omertà

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2015
    Posts
    178
    Rep Power
    21

    Re: mp5055 bad quaity

    Check image on drum.
    I have seen the front pivot point for the transfer roller get knocked out of position causing poor transfer on the front side.
    Last edited by MIKON; 07-14-2021 at 03:11 AM. Reason: add pic

  5. #5
    Copier Technician 1,000+ Posts
    mp5055 bad quaity

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: mp5055 bad quaity

    Quote Originally Posted by MIKON View Post
    Check image on drum.
    I have seen the front pivot point for the transfer roller get knocked out of position causing poor transfer on the front side.
    +1
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  6. #6
    Technician 250+ Posts Ricoh-ono's Avatar
    Join Date
    Feb 2008
    Posts
    325
    Rep Power
    39

    Re: mp5055 bad quaity

    Quote Originally Posted by MIKON View Post
    Check image on drum.
    I have seen the front pivot point for the transfer roller get knocked out of position causing poor transfer on the front side.
    Had this happen on an MP 3055 today. Both sides of the pivot point were stuck in the down position.
    Do what you can, with what you have, where you are. ~Theodore Roosevelt

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here