Hello everyone ! I have a ricoh mp301 that i cannot log in the web image monitor and i cannot change anything at the interface settings although i've done 5846-46, turned 5828-91 to 1 and 5985 to 1. Any ideas ? Thank you in regard.
Hello everyone ! I have a ricoh mp301 that i cannot log in the web image monitor and i cannot change anything at the interface settings although i've done 5846-46, turned 5828-91 to 1 and 5985 to 1. Any ideas ? Thank you in regard.
SP (Factory) SP5-846-046
Sent from my WAS-LX1 using Tapatalk
Is it that you cannot login or get an error when you try to access the device. If the latter, try accessing as a HTTPS:// device and not a HTTP:// device. Someone for some reason may have created a device certificate.
Is 802.11 enabled?
“I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins
so you've done 5846-046, but there's no mention of you then logging in as supervisor in order to reset the Administrator p/w, and then logging in as administrator to turn off all administrator authentication settings which are preventing you from changing any system settings
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks