MP 9001 browse network error

[Gift]

There is custom firmware for this model in the US to fix this problem, but I don't know if there is custom firmware for this techs location(Spain)

I guess not, afaik Ricoh Europe doesn't release them. A few years ago I was tempted to ask around for firmware in order to restore SMB function for many units out in the field. Finally I didn't asked because that would have undermined the work of our sales people^^

Customer can always enable old SMB versions on their end if they prefer to stick with a decade years old MFP...

[keithxxiii]

Open telnet, check SMB client auth level on both machines.
Make sure the setting is the same as the working machine.

[satins]

Good morning, then, why in other ricoh machines, I can see the workgroups and the compunters? and navigate through the differents pc and when selecting one, it ask me for usernamen and password, I can't do it here.

It seems that you are trying to upgrade/connect on the windows network. All networks are not same as they are managed by the administrator and they can set policies depending upon their company's standard requirement and hence the network firewall does not allow the device to connect unless the policies are changed. Sometimes, O.S upgrades are also the enhanced with firewall security with similar results.

[pakobernal]

Open telnet, check SMB client auth level on both machines.
Make sure the setting is the same as the working machine.

How? Can you explay the procedure to me?