Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Jul 2021
    Location
    North Providence
    Posts
    2
    Rep Power
    0

    Newbie - Error Code SC548-00

    Hello - I have a Ricoh Pro5100s . I am trying to clear error code SC548-00

  2. #2
    Service Manager 2,500+ Posts
    Newbie -  Error Code SC548-00

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON (Originally Nova Scotia)
    Posts
    3,420
    Rep Power
    125

    Re: Newbie - Error Code SC548-00

    Quote Originally Posted by Debbi1963 View Post
    Hello - I have a Ricoh Pro5100s . I am trying to clear error code SC548-00
    It needs to be reset in service mode by a tech - after the failure that caused it in the first place is repaired.

  3. #3
    Senior Tech 100+ Posts Robinh's Avatar
    Join Date
    Dec 2009
    Location
    Bremerton
    Posts
    109
    Rep Power
    28

    Re: Newbie - Error Code SC548-00

    Quote Originally Posted by Debbi1963 View Post
    Hello - I have a Ricoh Pro5100s . I am trying to clear error code SC548-00
    SC548 is a fuser film rotation error. I'm not personally familiar with the 5100, but most Ricoh models will reset an error code if you enter the service mode, then shut the machine off and back on again. On some Ricoh models, you press clear modes, then enter 1,0,7, then press clear stop and hold it for three seconds.

    Good luck, be careful resetting a fuser code, it locks out so it won't catch on fire, and this process should only be performed by a skilled tech.

  4. #4
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    15,682
    Rep Power
    439

    Re: Newbie - Error Code SC548-00

    Quote Originally Posted by Debbi1963 View Post
    Hello - I have a Ricoh Pro5100s . I am trying to clear error code SC548-00
    By "I have a Ricoh Pro5100s" do you men that you are an end user and not a qualified tech? Production units should not be worked on by untrained individuals. You can do more damage than you can fix.

    Turn the main switch off.
    Remove the fusing unit and make the necessary repair/rebuild.
    Turn the main switch on.
    Reset the SC (set SP5-810-1).
    Turn the main switch off and on.

  5. #5
    Junior Member
    Join Date
    Jul 2021
    Location
    North Providence
    Posts
    2
    Rep Power
    0

    Red face Re: Newbie - Error Code SC548-00

    Thank you the machine was loaded with paper dust and I believe the sensors were covered. I was able to reset the code and machine is working fine.
    Thank again

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here