Could someone help me out with a part number for the reverse roller drive shaft, not the one with the roller on it but the one that drives it with the 2 press fit gears on it. It is the DF 3060 D578. Thank you in advance.
Could someone help me out with a part number for the reverse roller drive shaft, not the one with the roller on it but the one that drives it with the 2 press fit gears on it. It is the DF 3060 D578. Thank you in advance.
Slimslob, hmmm. The product support says that is what it is. I didn't think to get the data plate info off the Doc Feeder before I left the account. I will double check before I order thou.
After looking at the 3060 parts catalog, Slimslob you are correct. That is not the Doc Feeder that is on it. Thank you! I will go back and get the model number tomorrow and then proceed from there. Thanks again.
The information I posted came from Product Support Guides and Service Manuals. The MP C4502 normally shipped with the SPDF. If you wanted the ARDF you had to special order.
It's a DF3070 and the same as the ARDF on the MP4002/5002, so this is what I expect you're looking for (#20)
I've replaced a bunch.
P/N: B802 2231
ARDF.pdf
Edit: I pasted the wrong P/N initially.
Bookmarks