Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,540
    Rep Power
    42

    mpc3002 jams with tray 1 paper did not move

    I replaced tray 1 paper feed unit ass'y with a referbished one (new one way's and paper feed rollers).
    Problem remains.
    I checked the serv manual 3002 & 3001 for details about the paper feed mechanisme, but there is no chapiter "detailed descriptions" there. mpc3000 has this chapiter, but is it the same mechanism?
    Anyone can throw me a bone here? .
    Thanks

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,540
    Rep Power
    42

    Re: mpc3002 jams with tray 1 paper did not move

    Do you use the pick up belt D0892830 for mpc3001 or just the AF030085 (as i do)?

    Paper feed rollers:

    AF030090 serie MP4000 GREEN
    AF030085 serie C2800 C3001 C3002 ORANGE
    AF030094 serie C3003 C3004 GREEN

    Paper feed units:
    Mp4000 = sp8200 = mpc3500
    ! different unit for LCT or optional tray
    mpc3001 : D0892750 ass’y with pick up belt D0892830
    mpc3002 : D1422750 ass’y with pick up roller AF030085

    Referbish paper feed units
    Replace levers G0652767 & AB011218

  3. #3
    Technician
    Join Date
    Jan 2020
    Location
    KENT
    Posts
    29
    Rep Power
    4

    Re: mpc3002 jams with tray 1 paper did not move

    Quote Originally Posted by Mark Bbb View Post
    I replaced tray 1 paper feed unit ass'y with a referbished one (new one way's and paper feed rollers).
    Problem remains.
    I checked the serv manual 3002 & 3001 for details about the paper feed mechanisme, but there is no chapiter "detailed descriptions" there. mpc3000 has this chapiter, but is it the same mechanism?
    Anyone can throw me a bone here? .
    Thanks

    If the rollers are not making contact with the paper to pull it through, check the solenoid, the door cable/connector or the main board. More likely it's the connector not pushed all the way in.

  4. #4
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    1,181
    Rep Power
    40

    Re: mpc3002 jams with tray 1 paper did not move

    These pick up belts were the biggest crap - we also use regular pick up rollers. You might need an additional plastic washer in order to keep that whitish/yellowish rholder thingy properly in place, otherwise it might got stucked and the pick up roller won't move downwards.

  5. #5
    Senior Tech 250+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    448
    Rep Power
    20

    Re: mpc3002 jams with tray 1 paper did not move

    Quote Originally Posted by Mark Bbb View Post
    I replaced tray 1 paper feed unit ass'y with a referbished one (new one way's and paper feed rollers).
    Problem remains.
    I checked the serv manual 3002 & 3001 for details about the paper feed mechanisme, but there is no chapiter "detailed descriptions" there. mpc3000 has this chapiter, but is it the same mechanism?
    Anyone can throw me a bone here? .
    Thanks
    hi, try replacing the tray.
    it happened to me that the rear part, honestly made of plastic a bit too light, tends to deform and move forward when the drawer is inserted, and the station operating lever does not work correctly, alternatively (as I do io) you can apply / glue a piece of thick, cut-out plastic to that point on the tray

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here