MP C6004 paper curling

[digicor]

I have lowered the fuse temp, in all places to do so,
1-1105 fc center was default i set to 125
1-1106 fc press was default i set to 112
no difference/ I took my own paper no difference / firm ware is up to date/
i have others without fins that dont do this with no extra exit guide piece .....
any one have a solution? Thanks

[anothertech]

How many copies on the fuser? Might need a fuser rebuild.

[slimslob]

Three things. Paper.Paper.Paper.

1. Cheap paper that has been cut from too close to the end of the roll
2. To much moisture in the paper. Install tray and drum heaters.
3. Paper being printed on the wrong side first. Paper used to have an arrow on the label indicating which side to print first. Many don't anymore.

[Phil B.]

Three things. Paper.Paper.Paper.

1. Cheap paper that has been cut from too close to the end of the roll
2. To much moisture in the paper. Install tray and drum heaters.
3. Paper being printed on the wrong side first. Paper used to have an arrow on the label indicating which side to print first. Many don't anymore.

+1 ..... three bags full.

Sent from my SM-G960U using Tapatalk

[mga]

I have lowered the fuse temp, in all places to do so,
1-1105 fc center was default i set to 125
1-1106 fc press was default i set to 112
no difference/ I took my own paper no difference / firm ware is up to date/
i have others without fins that dont do this with no extra exit guide piece .....
any one have a solution? Thanks

If the machine once had a finisher on it the problem will be the exit roller that you fit when fitting bridge unit that gives that problem

[mikadonovan]

Make sure that sp 1113-001 (Curl Correction) is set to default value. Even though this sp is called curl correction, the manual states it is not effective at reducing curl on this model, and to keep it at default. Who is writing this stuff?
It also states that sp1115 must also be at default.

The manual's only suggested solution for curling is to install tray heaters, but since you brought in your own dry paper, that must not it. The paper you brought was dry, right?

[digicor]

If the machine once had a finisher on it the problem will be the exit roller that you fit when fitting bridge unit that gives that problem

do u have a part number for the other exit roller?

[digicor]

Make sure that sp 1113-001 (Curl Correction) is set to default value. Even though this sp is called curl correction, the manual states it is not effective at reducing curl on this model, and to keep it at default. Who is writing this stuff?
It also states that sp1115 must also be at default.

The manual's only suggested solution for curling is to install tray heaters, but since you brought in your own dry paper, that must not it. The paper you brought was dry, right?

yes the paper was dry and in my machine from my office , not haveing any problems

[digicor]

i purchased the exit tray assembly that wasnt with the machine. since we removed the fin. we didnt have have it
its not the one we have on the machine, i guess the c5503 exit tray fits the c6004, so this may solve the problem, it looks to be a lot different from the picture, well see

[mga]

do u have a part number for the other exit roller?

Think this is it