Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. 10-09-2021 #1
    toddanderson
    toddanderson is offline
    Senior Tech 100+ Posts
    Join Date
    Dec 2005
    Location
    Bell, California
    Posts
    212
    Rep Power
    41

    SC590-4. RYB (Relay Board) FU2. Ricoh pro 8200

    I have a Ricoh pro 8200 that has a SC590-4 code
    I have replaced the relay pwb
    I have tested all the motors all seem to be turning.
    Thanks for any help
    Reply With Quote Reply With Quote
  2. 10-09-2021 #2
    MIKON
    MIKON is offline
    Senior Tech 100+ Posts
    Join Date
    Jul 2015
    Posts
    178
    Rep Power
    21

    Re: SC590-4. RYB (Relay Board) FU2. Ricoh pro 8200

    Check the connector on the fuser and frame for damage or paper in it. Good Luck
    Reply With Quote Reply With Quote
« Mpc 3004ex, dont recognize sd card from slot 2, despite controller replacement | Ricoh mfp's "toner near end" automatic email notification. »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here