Fuser Sleeve

[Spud]

Good Evening, Can you use a D2424042, (MP C4504) Fusing Sleeve in a MP C3504?

Thank you

[slimslob]

Seeing as Ricoh only makes 2 different sleeve units, one for where the local power 110/120 volts and the other for 220/240 volts, that is the 220/240 volt model and you liver in a 220/240 volt part of the world, YES.

[nokktekk]

Good Evening, Can you use a D2424042, (MP C4504) Fusing Sleeve in a MP C3504?

Thank you

I am not sure on the 04 series. But I do know for a fact that The MP C4503 sleeve is different from the MP C3003. I think they are different. But, you can try and let us know.

[Gift]

I think the sleeves for the higher speed MPCs uses a different lamp with higher wattage/more power - from my experience they work for the slower units, too but not vice versa. Haven't tested it with the 3004 series though but with it's predecessors.

[Spud]

Yes the MP C4503 Sleeves are interchangeable.. I have have since found out that the 4504 are different to the 3504. The 4504 sleeves have fuser shields within the sleeve.

Thanks for all your input.

[TonerMunkeh]

The D150 sleeve has the shield too and I fit it to the 30 and the 35. May be worth trying?

[mga]

Good Evening, Can you use a D2424042, (MP C4504) Fusing Sleeve in a MP C3504?

Thank you

Yes it works

[Pixtech Frameworks]

3003/6003 sleeve use the same sleeve, even 2003/2503 too. They all use same sleeve, I've tried it on several model and it works.