Thanks: 
Likes: Hi Techs
I have a Ricoh mpc 2011 which is taking long to
print when a print job is sent. I have other printer brands in
the same segment which are working fine.
Please assist me resolve this issue.
thank you.
Dislikes: 0
Hi Techs
I have a Ricoh mpc 2011 which is taking long to
print when a print job is sent. I have other printer brands in
the same segment which are working fine.
Please assist me resolve this issue.
thank you.
Which printer driver are you using? Is it printing slowly from all applications?
Download the driver from the ricoh support page and install it. it will surely be using the windows driver.
MP C2011SP Downloads | Ricoh Global
Is it printing via IP or WSD port?...if WSD switch to IP
Sent from my WAS-LX1 using Tapatalk
PCL 6, yes all applicationsOriginally Posted by nokktekk
The lower speed 03's have always been catastrophically slow printing. Try switching Java off if it's not being used.
+1 for WSD or perhaps a crappy wlan connection in case there's a wireless network
its via IP
did you really check the port at the customers driver setting? If yes, try a quicky test with your laptop + direct lan connection to rule out the MFP or customer it.
Many times I would setup a workstation with a local printer instead of going through a print server share. The slow printing issues would be resolved. Flush the print queue at the server or use an KM undelete to remove the print driver and reinstall. Maybe try PCL5e?
It's rare but a HDD going bad can cause slow printing.
Also rare is a duplicate IP. Someone with a laptop or mobile device that isn't always on the network could have the same IP as the Ricoh.
Reply With Quote
Bookmarks