"call service" in WIM without any further description

[Mark Bbb]

Is there a way to display the concerned error? In WIM it only say "call service" without any further description.
Thanks in advance.

wim bel service.jpg

[Daniel_B81]

Could be a PM-component that has passed over time, think i've seen it myself on some older machine and then it was the ITB or ITB Cleaning unit that was on 150%.

[Mark Bbb]

There was a finisher installed which we removed together with the bridge unit.
But as far as the manual indicates, there is no need to change a sp mode for (de)install a finisher sr3090 or 790.

[KenB]

I see this alot on current models also, the IM C4500 and MPC 4504 in particular. (Although those 2 accout for 99+% of the models I deal with.)

Therefore, I have the same question.

[sandmanmac]

A lot of used machines I pick up show an "RC gate connection error" in the WIM when I connect them to networks, with no other messages.
I run SP5806-209 (Remote Service / Install clear) to clear it.

I think you can also do this in User tools/ system settings/ extended security/ administrator/ extended security/ @ remote service (Set to prohibit)

I can't say for sure, but maybe the newer models don't display the specific message details in the WIM (?), but running the SP and rebooting can't hurt.

[sandmanmac]

A lot of used machines I pick up show an "RC gate connection error" in the WIM when I connect them to networks, with no other messages.
I run SP5806-209 (Remote Service / Install clear) to clear it.

I think you can also do this in User tools/ system settings/ extended security/ administrator/ extended security/ @ remote service (Set to prohibit)

I can't say for sure, but maybe the newer models don't display the specific message details in the WIM (?), but running the SP and rebooting can't hurt.

Coincidentally, I just licked up and MP C406 that has the same behavior. If you click on "System" it will display the error, which as expected, was an "RC gate error".
I also just realized that I gave the wrong SP (above) to reset it. It should Be SP5816-209

[DRichard]

Coincidentally, I just licked up and MP C406 that has the same behavior. If you click on "System" it will display the error, which as expected, was an "RC gate error".
I also just realized that I gave the wrong SP (above) to reset it. It should Be SP5816-209

I don't know 'bout ya'll up in The Great White North but here in The Lower Forty-eight, we NEVER recommend licking up any used copiers. You just never know who else might have licked it before you. I guess ya'll just do things differently up there...

[sandmanmac]

I don't know 'bout ya'll up in The Great White North but here in The Lower Forty-eight, we NEVER recommend licking up any used copiers. You just never know who else might have licked it before you. I guess ya'll just do things differently up there...

How else am I supposed to find the best-tasting machines for resale?

[DRichard]

How else am I supposed to find the best-tasting machines for resale?

Copytechnet.com is a great source for all things copier related...start a new thread! (At least ONE of these freaks will have an opinion.)

[slimslob]

I don't know 'bout ya'll up in The Great White North but here in The Lower Forty-eight, we NEVER recommend licking up any used copiers. You just never know who else might have licked it before you. I guess ya'll just do things differently up there...

And you obviously lack the intelligence to be able to recognize a typo. It took most of us all of half a second to realize Sandy meant pick.