Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Technician
    Join Date
    Jun 2021
    Location
    SV
    Posts
    10
    Rep Power
    6

    Ricoh 1035 paper jam Code: 013

    crab leg buffet wilmington nc
    Ricoh Aficio 1035 paper stop at this point after i cleaned used toner bottle (it was full).

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Oct 2019
    Location
    Kzn
    Posts
    319
    Rep Power
    20

    Re: Ricoh 1035 paper jam Code: 013

    On the 1035 that normally refers to a jam at either the registration sensor or fuser/duplex sensor.

    Change those 3 sensors

    But before you do that please do a full major service. Also please check if your transfer belt unit is turning properly. That transfer belt unit should be stripped cleaned and serviced and transfer belt and blade should be changed.

    Hope that helps

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Oct 2019
    Location
    Kzn
    Posts
    319
    Rep Power
    20

    Re: Ricoh 1035 paper jam Code: 013

    Also check if your registration roller is turning and if your registration clutch is working. Could be a faulty clutch.

  4. #4
    Technician
    Join Date
    Mar 2021
    Location
    Mans
    Posts
    34
    Rep Power
    10

    Re: Ricoh 1035 paper jam Code: 013

    Quote Originally Posted by KeviM View Post
    Also check if your registration roller is turning and if your registration clutch is working. Could be a faulty clutch.
    agree
    it's 80% regestration sensor need to be cleaned
    and if the sensor is ok try to check the regestration rollers it may be the clutch

  5. #5
    Senior Tech 250+ Posts 8T2's Avatar
    Join Date
    Aug 2015
    Location
    Currently in the Vaal Triangle area in Gauteng, South Africa
    Posts
    257
    Rep Power
    30

    Re: Ricoh 1035 paper jam Code: 013

    Over and above what has already been suggested I think being as old as a 1035 is there's a chance your registration bushes broke so would check them out too if I was scratching around there

    Sent from my WAS-LX1 using Tapatalk

  6. #6
    Service Manager 1,000+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    1,346
    Rep Power
    69

    Re: Ricoh 1035 paper jam Code: 013

    Quote Originally Posted by Kosta25 View Post
    crab leg buffet wilmington nc
    Ricoh Aficio 1035 paper stop at this point after i cleaned used toner bottle (it was full).
    doesn't seem to look good, starts with cleaning all sensors ... blow air (carefully) + wet cotton fiock

  7. #7
    Retired 10,000+ Posts
    Ricoh 1035 paper jam Code: 013

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Ricoh 1035 paper jam Code: 013

    Quote Originally Posted by Kosta25 View Post
    crab leg buffet wilmington nc
    Ricoh Aficio 1035 paper stop at this point after i cleaned used toner bottle (it was full).
    I am seeing a lot of waste toner on the ends of the drum to include latent image of the previous page copied. I am also seeing toner that has dropped down onto the registration roller and other areas below the drum. Given that J013 is a late registration sensor jam, i.e. the lead edge is either late or not detected at all, I would say that the registration sensor is also coated with toner. Cleaning the sensor with a soft lint free cotton clothe moistened with water only should take care of the problem for a while but until you correct whatever is causing the toner dropping, it will be back.

  8. #8
    Technician
    Join Date
    Jun 2021
    Location
    SV
    Posts
    10
    Rep Power
    6

    Re: Ricoh 1035 paper jam Code: 013

    Sorry but where is located registration senzor?

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Oct 2019
    Location
    Kzn
    Posts
    319
    Rep Power
    20

    Re: Ricoh 1035 paper jam Code: 013

    Quote Originally Posted by Kosta25 View Post
    Sorry but where is located registration senzor?
    Registration sensor is directly below the registration rollers which is the rubber roller and silver roller where the paper is stopping and not going through.

    My friend this is printer and copier repair basics , if you don't know this it makes me wonder if you know printer repairs. Please friend be careful. If you don't know what you doing you can end up causing more damage.

    Also , what Slimslob said is absolutely right, which is why I said that the machine needs a major service

    All the best to you

  10. #10
    Service Manager 1,000+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    1,346
    Rep Power
    69

    Re: Ricoh 1035 paper jam Code: 013

    Quote Originally Posted by Kosta25 View Post
    Sorry but where is located registration senzor?
    with this question, you made it clear that you are not a technician (nothing bad) but it is better to specify! so that the advice given to you is specific to your rank! otherwise you could worsen the situation, and possibly run risks for your safety, in the event, even if rare, of problems on high voltage, or overheated component!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here