Ricoh IM C300 SC672-02

[slimslob]

If I was going to post something on a site that used another language, I'd translate what I wrote into that language before posting, that way I'm the only one that has to translate it, instead of every person that wants to read it. Common sense, English board, post in English.

Not entirely true. Let's say there any other members who only speak the same language as the person who makes the post speaks. They then have to translate it back.

[dalewb74]

for 672-02
1. Reconnect the USB cable and harness. (Reconnect both the operation
panel end and the controller end.)
2. Replace the USB cable and harness.
3. Replace the controller board.
4. Replace the operation panel.
for 670-02
• CPU reset by watchdog timer
• CPU reset by software
• CPU reset by CPU exception handling
• Slave VODKA reset
• CPU reset due to hardware malfunction/noise
• Slave VODKA reset due to hardware malfunction/noise
The engine board was reset at an unexpected time.
Check if the SC occurs by turning the main power OFF then ON at least 10
times. If the SC occurs again, do the following steps. Check if the SC reoccurs
by cycling the power after each step.
1. Reconnect the BiCU (PCB1) and Controller board (PCB24).
2. Replace the board in the following priority:
1. BiCU (PCB1)
2. PSU (PCB16)
3. Controller board (PCB24)

[gilbert]

Make sure the toners are seated properly, this latest incarnation of the Griffin is just as annoying as it's older siblings for this.

thank you for your response.did have sc670-02 how was it resolved?

[TonerMunkeh]

I had to change the toner hopper and the BRB board when a customer went round a hospital unit looking for a yellow toner, breaking 4 machines in the process.

[gilbert]

Hellow Techs
Please assist me i have IMC 300 which is not initializing.
only laser motors are running, it is coming ready but will not print
or copy once i command it to do so.It keeps on showing ""PROCESSING"'PRINTING"' until
Sc672-02 appears.I have tried another BICU and Controller board form another device
but error keeps coming.

Griffin is not a good device to work on, I touched some cables on BICU it came
to SC570-02 . Touched toner hoper the error disappeared. Machine is now initializing
giving a noise from drive and sc240-02 pops up. I have tried another BK/CY laser FROM A WORKING MACHINE
error still appears.

[gilbert]

I had to change the toner hopper and the BRB board when a customer went round a hospital unit looking for a yellow toner, breaking 4 machines in the process.

Im now having sc240-02.and a bit of noise from drive section as Black PCU is not rotating.Thank you, It was coming from the same toner
hopper and the contacts on the board behind

[TonerMunkeh]

Check the laser ribbon connectors on the BICU, it's possible for them to get a bit mangled when you take the BICU cage off.

[DRichard]

for 672-02
1. Reconnect the USB cable and harness. (Reconnect both the operation
panel end and the controller end.)
2. Replace the USB cable and harness.
3. Replace the controller board.
4. Replace the operation panel.
for 670-02
• CPU reset by watchdog timer
• CPU reset by software
• CPU reset by CPU exception handling
• Slave VODKA reset
• CPU reset due to hardware malfunction/noise
• Slave VODKA reset due to hardware malfunction/noise
The engine board was reset at an unexpected time.
Check if the SC occurs by turning the main power OFF then ON at least 10
times. If the SC occurs again, do the following steps. Check if the SC reoccurs
by cycling the power after each step.
1. Reconnect the BiCU (PCB1) and Controller board (PCB24).
2. Replace the board in the following priority:
1. BiCU (PCB1)
2. PSU (PCB16)
3. Controller board (PCB24)

Isn't it great when a service code points you right to the problem!

[dalewb74]

Isn't it great when a service code points you right to the problem!

yeah amazing how all that works when you have all the info... lol

[Gift]

Griffin is not a good device to work on, I touched some cables on BICU it came
to SC570-02 . Touched toner hoper the error disappeared. Machine is now initializing
giving a noise from drive and sc240-02 pops up. I have tried another BK/CY laser FROM A WORKING MACHINE
error still appears.

Have you tried and swap the operation panel before digging in to all these components? I'm not shure if swapping the laser might require some SP adjustments.