I checked the service manual. SP 8801 displays the toner remaining when you are in SP mode and go to that SP. It does not allow displaying on the panel during normal operation for the end user.
I checked the service manual. SP 8801 displays the toner remaining when you are in SP mode and go to that SP. It does not allow displaying on the panel during normal operation for the end user.
thanks, from the description, it would seem this, now I also screw it on the manual ... who knows why they put it up there? ... then I'll give you the feedback!
8801
[Toner Remain]
These SPs display the percent of toner remaining for each color. This SP allows the
user to check the toner supply at any time.
Note: This precise method of measuring remaining toner supply (1% steps) is better
than other machines in the market that can only measure in increments of 10 (10%
steps).
8-801-001 K C* [0 to 100 / 0 / 1% /step]
I tried on the phone with the customer, but unfortunately, it would seem that the set value (100%) in this case, cannot be changed, strange, because from the description it seems the right one? I also tried here, on an mpc6003, and the value cannot be changed, maybe I'm missing something?
I heard the ricoh italia, and they told me that on that model there is no possibility to satisfy my request, there is only for the mp3353 with android panel, never marketed in Italy
thank you all for your cooperation
It's in Special SP
Special SP's aren't listed in the SM ,same as factory SP's aren't listed
Bookmarks