Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 0
IM c3000 copy and scan not registered
I have made a clear memory sp5801-001 ,i inserted all sps of the sp sheet ,however i have an issue with scan and copy, the scanned page is not registered from the top , bottom and the middle, the rest of the page it's registered just fine.
i tried color calibration for copy and sp 2-111-001 also 2-101001 no result
please find the attachment WhatsApp Image 2022-03-22 at 11.14.08 AM.jpgWhatsApp Image 2022-03-22 at 11.14.08 AM.jpgWhatsApp Image 2022-03-22 at 11.14.09 AM (2).jpgWhatsApp Image 2022-03-22 at 11.14.09 AM (1).jpg
-
Re: IM c3000 copy and scan not registered
You should avoid a memory clear - if it's about the customer privacy you can just perform SP5804-004->END
Do you mean the scan image isn't aligned properly on the copy/scan? Then you should tweak these Scanner related SPs:
4-008-001
Sub Scan Magnification
Adj
ENG* [-1.0 to 1.0 / 0.0 /
0.1%/step]
4-010-001
Sub Scan Registration
Adj
ENG* [-2.0 to 2.0 / 0.0 /
0.1mm/step]
4-011-001
Main Scan Reg ENG* [-2.5 to 2.5 / 0.0 /
0.1mm/step]
-
Re: IM c3000 copy and scan not registered
What frustrating samples to provide.
I, for one, have no idea what those are "supposed" to look like.
Print off and scan a colour test pattern, and upload a proper PDF.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks