Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Technician
    Join Date
    Dec 2009
    Posts
    11
    Rep Power
    26

    Re: Ricoh MP7500, 8000, 8001, 7502, 7001, 6001, light copies after change transfer be

    Is the contact on the transfer unit good?
    I remember there was an old bulletin on the Aficio650, right on the copper contact.

  2. #12
    Field Supervisor 500+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    930
    Rep Power
    43

    Re: Ricoh MP7500, 8000, 8001, 7502, 7001, 6001, light copies after change transfer be

    Quote Originally Posted by chinyee View Post
    HI these riocoh Martini modal , i have 2 uni MP 8000 & MP7502 , both i have same problem which is after i change NEW original Ricoh Transfer belt, then the printout become light BUT when i revert back to the ols transfer belt the printour is fine


    anyone have same issue ??


    P/s : i have try wil 3 ricoh new transfer belt none are working.


    thnak you
    what code does the belt have? could it be that you have mounted that of the 6503? the manufacturer has recently been changed.
    was there a sheet in the box with the values to be corrected? ... try these, at most you put them back as they were before....give a try
    Attached Files Attached Files
    "loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)

  3. #13
    Retired 10,000+ Posts
    Ricoh MP7500, 8000, 8001, 7502, 7001, 6001, light copies after change transfer belt

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    22,798
    Rep Power
    660

    Re: Ricoh MP7500, 8000, 8001, 7502, 7001, 6001, light copies after change transfer be

    Quote Originally Posted by chinyee View Post
    HI these riocoh Martini modal , i have 2 uni MP 8000 & MP7502 , both i have same problem which is after i change NEW original Ricoh Transfer belt, then the printout become light BUT when i revert back to the ols transfer belt the printour is fine


    anyone have same issue ??


    P/s : i have try wil 3 ricoh new transfer belt none are working.


    thnak you
    I am wondering why you replaced just the transfer belt? If it was because of light copies, the problem most likely was not the belt. The majority of the time when I have had light copies and prints with any martini it has been a dirty ID sensor caused by toner haze buildup. For the martini the value of SP 3001-001 should be in the range of 1 to 70 depending upon the specific model. Anything above that and you either have a dirty or bad sensor.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here