Ricoh MP7500, 8000, 8001, 7502, 7001, 6001, light copies after change transfer belt

[chinyee]

HI these riocoh Martini modal , i have 2 uni MP 8000 & MP7502 , both i have same problem which is after i change NEW original Ricoh Transfer belt, then the printout become light BUT when i revert back to the ols transfer belt the printour is fine


anyone have same issue ??


P/s : i have try wil 3 ricoh new transfer belt none are working.


thnak you

[rthonpm]

Have you also changed the rest of the PM parts?

Sent from my BlackBerry using Tapatalk

[chinyee]

Have you also changed the rest of the PM parts?

Sent from my BlackBerry using Tapatalk

yes new drum, dev and magnetic roller >>
the problem is when i use the old belt its fine, then change to new belt become blur ..., i though is there any setting for transfer belt ??

[slimslob]

All Genuine Ricoh or are you wasting money on cheap Chinese knock offs?

[satins]

HI these riocoh Martini modal , i have 2 uni MP 8000 & MP7502 , both i have same problem which is after i change NEW original Ricoh Transfer belt, then the printout become light BUT when i revert back to the ols transfer belt the printour is fine


anyone have same issue ??


P/s : i have try wil 3 ricoh new transfer belt none are working.


thnak you

I have faced this issue.
I figured out that the problem is primarily with storage of the transfer belt but that was a while back.
I believe it had lost some of its default charge characteristics with the long storage.
However, it may come back to life if you hook it in the machine for another 4-5 days (if you can) and wait...

[chinyee]

I have faced this issue.
I figured out that the problem is primarily with storage of the transfer belt but that was a while back.
I believe it had lost some of its default charge characteristics with the long storage.
However, it may come back to life if you hook it in the machine for another 4-5 days (if you can) and wait...

Thank for the suggestion, i will give a try, indeed the storage for this belt is quite long. Hopefully can solve. Tq

[GIUBOSS]

HI these riocoh Martini modal , i have 2 uni MP 8000 & MP7502 , both i have same problem which is after i change NEW original Ricoh Transfer belt, then the printout become light BUT when i revert back to the ols transfer belt the printour is fine


anyone have same issue ??


P/s : i have try wil 3 ricoh new transfer belt none are working.


thnak you

I would have stopped at the first new transfer belt, if original.

[stani]

As satins sad, it can be in issue with long storage. If you have an old transfer unit, you can try installing your new transfer belt in it and leave for some days to let the tension release. Afterwards install the stretched transfer belt in your machine.

[giovanio]

Try changing the transfer values ​​from the service program

[chinyee]

Try changing the transfer values ​​from the service program

cause


what sp value you suggest, i like to try also ,


BUT anyway the density imporve day by day already , most due to long storage