Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jul 2016
    Location
    Wrexham, Wales, UK
    Posts
    42
    Rep Power
    13

    IM 350 mono mfd Error: SC332-00

    error relates to TONER END DETECTION ERROR

    1. machine is new. Customer has done 883 pages. serv man states try new pcdu and toner. remove toner supply level sensor and toner supply clutch and reseat. DONE
    2. 2nd visit. put new drum and toner in still does sc332-00. noticed the check status- clicked machine it says loading toner then does the sc code
    3. my next step i wanted to order that toner supply sensor and toner supply clutch but thought id give Ricoh Technical a call
    4. He sent me 2 RTBs 1st one i read went on about changing springs in the Drum unit you can get modified one's. this was pointless. I have tried a new drum. 2nd RTB swap over the toner chip reader tag with drum reader tag (they are the same) but thought whats the point. when i have had them go its not toner cart detected or no drum detected. But, i did what he asked and swapped them. Still sc332-00
    5. I found the toner supply level sensor test in MODE which you can select off or on. fooled door sensor to see if by putting it to On the led in left side wall for this sensor, nothing happens. then i figured out with the drum in the copier, the toner level panel app shows its level (about 50%) take out the drum. level shows 0. so that must be working.
    6. I have ordered the Toner Supply Clutch CL2 and WILL UPDATE (there is no test for this in MODE but im can see toner full up at the open shutter on the toner cart and the open shutter on the drum side is rammed full. im presuming if this clutch is down no toner is going anywhere.

    Ben

  2. #2
    Senior Tech 100+ Posts UNICORNico's Avatar
    Join Date
    May 2018
    Location
    Murcia
    Posts
    202
    Rep Power
    13

    Re: IM 350 mono mfd Error: SC332-00

    Quote Originally Posted by Jedi Ben View Post
    error relates to TONER END DETECTION ERROR

    1. machine is new. Customer has done 883 pages. serv man states try new pcdu and toner. remove toner supply level sensor and toner supply clutch and reseat. DONE
    2. 2nd visit. put new drum and toner in still does sc332-00. noticed the check status- clicked machine it says loading toner then does the sc code
    3. my next step i wanted to order that toner supply sensor and toner supply clutch but thought id give Ricoh Technical a call
    4. He sent me 2 RTBs 1st one i read went on about changing springs in the Drum unit you can get modified one's. this was pointless. I have tried a new drum. 2nd RTB swap over the toner chip reader tag with drum reader tag (they are the same) but thought whats the point. when i have had them go its not toner cart detected or no drum detected. But, i did what he asked and swapped them. Still sc332-00
    5. I found the toner supply level sensor test in MODE which you can select off or on. fooled door sensor to see if by putting it to On the led in left side wall for this sensor, nothing happens. then i figured out with the drum in the copier, the toner level panel app shows its level (about 50%) take out the drum. level shows 0. so that must be working.
    6. I have ordered the Toner Supply Clutch CL2 and WILL UPDATE (there is no test for this in MODE but im can see toner full up at the open shutter on the toner cart and the open shutter on the drum side is rammed full. im presuming if this clutch is down no toner is going anywhere.

    Ben
    Hi Ben.
    I do not think it can help you much, but you should pass report this incident to Ricoh directly, because if it is new, the most appropriate thing is that you process with them through the technical attention portal. (I don't know what it will be called in your country, here is RICESS)
    From the headquarters in your country, if they do not see the incidence clearly and cannot solve the problem or give you a logical answer, they escalate it to Ricoh Japan (central) for them to review.
    ​Apologies for my English, it's not my mother tongue and I'm helping the translator.
    ALL WILL BE WELL

  3. #3
    Riso dude 250+ Posts jermyth's Avatar
    Join Date
    Mar 2011
    Location
    Land of Diffusion
    Posts
    407
    Rep Power
    31

    Re: IM 350 mono mfd Error: SC332-00

    Check the toner and PCDU connectors. They may be bent, deformed. There is a tech pub about add toner message too.
    Good luck.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here