Dislikes: 0
Hi Guys,
I'm having a issue with firmware update via SD card on Ricoh Pro 907ex can some one help/guide
I've formatted the SD card using a SD card formatter
I've created a folder "romdata" on the SD card
I've put all the firmware files into the folder
Tried to update the machine after a delay shows failed
where have i gone wrong can some one help.
thanks
Last edited by antoney suresh das; 06-13-2022 at 05:51 AM. Reason: adding picture
In the romdata folder create a folder named D059 and put all the firmware files in the D059 folder. Also the firmware files that you want to put on the SD card are the extracted .rfu files and not the downloaded rfg*****.zip files.Originally Posted by antoney suresh das
thanks slim slob i couldn't get the last part when i unzip using 7zip extractor i get files .fwu files hoe do i convert it to the file format you mentioned?
Last edited by antoney suresh das; 06-13-2022 at 07:05 AM. Reason: spelling
i've changed the file extension let me try
I tried to update initially there was as usual a please wait screen and after a long delay a error code screen popped up showing SC816
You never ever change the extension of a file. Each format belongs to a specific form of use for the device.
From where did you download these files and for what specific use? Update by SD or Remotely?
SC 816
Energy save I/O sub system error.
An error occurred in the energy save sub system. This error occurs only when an energysub system module such as ASIC Whistle is present.
• Cycle the machine power off/on
• If cycling the machine off/on does not restore normal operation, replace the IOB.
Good luck...
"ALL WILL BE WELL" The battle cry that most inspires me to follow, from the DC's Comic character that I admire the most. And I feel satisfied with being better every day, and with using Gnu-Linux as my usual Operating System.Apologies for my English, it's not my mother tongue and I'm helping the translator.
Shouldn’t they be ‘fwu’ files? Are you inserting SD card incorrect slot?
Try another card, 2gb or 4 maximum.
download the .fwu files and extract them.
Create folder ''Romdata'' create D059 folder in Romdata.
copy extracted files in D059 folder.
insert the card in service slot.
boot the machine probably with door open and follow the instructions on scree,
Start updating with System/copy first.
Regard's
got the firmware copier firmware uk I guess it is genuine have you any suggestions please
X2
The files placed in the romdata folder need to be the .fwu extension.
You could also try using the Firmware update tool
Thanks: 
Likes: 
Reply With Quote
Bookmarks