Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: RICOH MPC 307

  1. #11
    Technician
    Join Date
    Mar 2022
    Location
    sarajevo
    Posts
    21
    Rep Power
    0

    Re: RICOH MPC 307

    Quote Originally Posted by tsbservice View Post
    And what about kind of driver/connection? WSD install is always bad.
    Use appropriate Ricoh driver for model and connectivity.
    It's not the machine.
    connection is by IP adresss i'ts not by WSD Port and driver is PCL 6 from ricoh page
    greetings

  2. #12
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    5,980
    Rep Power
    261

    Re: RICOH MPC 307

    Quote Originally Posted by esvesdin View Post
    connection is by IP adresss i'ts not by WSD Port and driver is PCL 6 from ricoh page
    greetings
    OK then I would probably do some machine reset, just in case.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  3. #13
    Service Manager 2,500+ Posts
    RICOH MPC 307

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,742
    Rep Power
    151

    Re: RICOH MPC 307

    Quote Originally Posted by esvesdin View Post
    It's not driver , I checked everything in detail and I'm using PCL 6 for a very long time so I'm pretty sure it's not driver
    greetings
    I'm standing my ground.
    Try removing the driver....and entire driver package. Reinstall, and reconfigure.
    The issue is on the PC end.
    Have you tried another PC/ laptop or even your phone?
    Heck, even Try a totally different driver. For example, PCL5c or even one for another machine like MP C305 or C306 (It's all PCL after-all)

  4. #14
    Service Manager 1,000+ Posts
    RICOH MPC 307


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,517
    Rep Power
    79

    Re: RICOH MPC 307

    Look in User tools, Machine settings, Printer. There is a setting in there that can be set to one sided or two sided.

  5. #15
    Technician
    Join Date
    Mar 2022
    Location
    sarajevo
    Posts
    21
    Rep Power
    0

    Re: RICOH MPC 307

    Quote Originally Posted by sandmanmac View Post
    I'm standing my ground.
    Try removing the driver....and entire driver package. Reinstall, and reconfigure.
    The issue is on the PC end.
    Have you tried another PC/ laptop or even your phone?
    Heck, even Try a totally different driver. For example, PCL5c or even one for another machine like MP C305 or C306 (It's all PCL after-all)
    I tried from another computer , even with another O.S. ( win 7 and win 8 )again the same , problem is there.I like the idea of an older driver and mobile aplication . I'm gona test it on monday olso I'm going to try with universal driver or maybe to see if there some firmweare update
    greetings

  6. #16
    Technician
    Join Date
    Mar 2022
    Location
    sarajevo
    Posts
    21
    Rep Power
    0

    Re: RICOH MPC 307

    Quote Originally Posted by anothertech View Post
    Look in User tools, Machine settings, Printer. There is a setting in there that can be set to one sided or two sided.
    I check that setting it is o.k that not the issue here .
    greetings

  7. #17
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    446
    Rep Power
    25

    Re: RICOH MPC 307

    Have you tried printing configuration page and see the behaviour of it? If it is the same, then must be from the printer. Maybe an SP mode or a Bit Switch.
    Aye! Cut the crap

  8. #18
    Technician
    Join Date
    Mar 2022
    Location
    sarajevo
    Posts
    21
    Rep Power
    0

    Re: RICOH MPC 307

    Quote Originally Posted by keithxxiii View Post
    Have you tried printing configuration page and see the behaviour of it? If it is the same, then must be from the printer. Maybe an SP mode or a Bit Switch.
    yes test page also make two passes
    wich bit switch did you mean?
    greetings

  9. #19
    Retired 10,000+ Posts
    RICOH MPC 307

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    26,433
    Rep Power
    766

    Re: RICOH MPC 307

    What is SP 5807-001 set to? It should be 3 for Europe. In some Asian countries they duplex everything.

    Also check SP 5195-001 is set to 0. Set to 1 could cause face up exiting.

  10. #20
    Technician
    Join Date
    Mar 2022
    Location
    sarajevo
    Posts
    21
    Rep Power
    0

    Re: RICOH MPC 307

    Quote Originally Posted by slimslob View Post
    What is SP 5807-001 set to? It should be 3 for Europe. In some Asian countries they duplex everything.

    Also check SP 5195-001 is set to 0. Set to 1 could cause face up exiting.
    in my case exiting face down
    greetings

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here