I need to clear the 'Transfer Belt Replacement' message on a MP C4503.
How is that done?
Thanks in advance for the information.
I need to clear the 'Transfer Belt Replacement' message on a MP C4503.
How is that done?
Thanks in advance for the information.
Follow the replacement procedures in the service manual.
Thank you slimsbob.
If I had a service manual, I certainty could do so.
However, I do not wish to replace the transfer belt, I just wish to turn off the message.
SP mode. If there is a tab that says PM counter/New unit set, do it in there. If not, go to system>data log>pm counter reset.
NEVER ASSUME ANYTHING
Funny, I don't recall ever seeing that message on one of those machines.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks