change to 3.5" hdd ricoh

**fbkhan3** · 01-31-2023

Originally Posted by aviso66

Hi, can i use a 3.5 inch hdd for a copier hdd instead of 3.5inch?

Hi,

I swapped it with 1TB SSD 3 years ago in one of MP 6503 and still no issues, customer has large print and scan volume on this device.

Regard's

**Gift** · 01-31-2023

Originally Posted by Oze

If Kyocera can use NVME SSD...then why can't other manufacturers?

KM does it, too - with some probs at the beginning but currently no issues. Of course the nvme/ssd should be of a decent quality.

**anothertech** · 02-01-2023

Originally Posted by fbkhan3

Hi,

I swapped it with 1TB SSD 3 years ago in one of MP 6503 and still no issues, customer has large print and scan volume on this device.

Regard's

Did it speed up bootup time or print spooling?

**fbkhan3** · 02-14-2023

Thanks for pointing it it out,
To be very honest i was in restricted area and tried that as an only available option that time and thing is working without a glitch also have SLNX installed on that device, didn't notice and compare if that has an impact on boot time and print spooling.

But i will surely note the details upon next visit.

Regard's