Sorry, it's difficult to be explicit. Here are fresh tests made 10 minutes ago :
Attachment 57310
Print of SP5.990.6
Attachment 57311
Scan on glass
Attachment 57312
Result : perfect
Attachment 57313
Scan on ADF
Attachment 57314 Attachment 57315 Attachment 57316
Result : print gap 4 or 5cm towards the rear of the machine. The cross lines pattern indicates the printing from drum is correct.
Attachment 57317
As the copy priont is made at 180°, the result is a sheet gap to the bottom from the reader's POV.
I'm currently downloading a firmware update, I must go to outside repairings, I'll chech on this machine this afternoon. I think about putting a new BICU card taken from another MP305+ and see if it works.
Bookmarks