Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Technician
    Join Date
    Nov 2023
    Location
    Mexicali
    Posts
    22
    Rep Power
    1

    What method do you use to remove excess toner?

    Let's say in the mpc3003 how to eliminate excess toner in a developer without changing it

  2. #2
    Senior member of CRS 2,500+ Posts
    What method do you use to remove excess toner?

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,368
    Rep Power
    102

    Re: What method do you use to remove excess toner?

    Quote Originally Posted by DeepRepair View Post
    Let's say in the mpc3003 how to eliminate excess toner in a developer without changing it
    Run “sky shots”
    "You can't trust your eyes, if your mind is out of focus" --

  3. #3
    Technician
    Join Date
    Nov 2023
    Location
    Mexicali
    Posts
    22
    Rep Power
    1

    Re: What method do you use to remove excess toner?

    How do I prevent toner from being added while shooting at the sky?

  4. #4
    Senior member of CRS 2,500+ Posts
    What method do you use to remove excess toner?

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,368
    Rep Power
    102

    Re: What method do you use to remove excess toner?

    Quote Originally Posted by DeepRepair View Post
    How do I prevent toner from being added while shooting at the sky?
    Sorry, my fault, I assumed you could disable ‘dv check’ in test mode.
    "You can't trust your eyes, if your mind is out of focus" --

  5. #5
    Technician
    Join Date
    Nov 2023
    Location
    Mexicali
    Posts
    22
    Rep Power
    1

    Re: What method do you use to remove excess toner?

    Quote Originally Posted by ZOOTECH View Post
    Sorry, my fault, I assumed you could disable ‘dv check’ in test mode.
    Do you know any function like that?
    I only know the sp 3100 that disables the reading of the toner chip

  6. #6
    Retired 10,000+ Posts
    What method do you use to remove excess toner?

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,048
    Rep Power
    983

    Re: What method do you use to remove excess toner?

    The first thing you have to do is determine why it has over toned. Otherwise it will just over tone again. Most likely the ID sensor is dirty or defective.

  7. #7
    Technician
    Join Date
    Nov 2023
    Location
    Mexicali
    Posts
    22
    Rep Power
    1

    Re: What method do you use to remove excess toner?

    Quote Originally Posted by slimslob View Post
    The first thing you have to do is determine why it has over toned. Otherwise it will just over tone again. Most likely the ID sensor is dirty or defective.
    It happens that the technicians where I work provide toner and reset the developer
    That's why I want to rescue those developers because they have few copies.

  8. #8
    Field Supervisor 500+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    576
    Rep Power
    45

    Re: What method do you use to remove excess toner?

    Quote Originally Posted by ZOOTECH View Post
    Sorry, my fault, I assumed you could disable ‘dv check’ in test mode.
    "Sky Shots" "DV Check" disable? Your Sharp Tech is leaking.

  9. #9
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,331
    Rep Power
    80

    Re: What method do you use to remove excess toner?

    split the unit and vacunm nr the mag roller w/out pulling developer off as you turn the unit by hand..in the proper direction....
    you will see a difference after 5-6 turns...
    i think the 03 dev units suck..very moody with mag roller void lines on any debris

  10. #10
    Senior Tech 100+ Posts
    What method do you use to remove excess toner?


    Join Date
    Feb 2018
    Location
    Andalucia
    Posts
    154
    Rep Power
    15

    Re: What method do you use to remove excess toner?

    The teachers are going to scold me.
    It has happened to me with poor quality toner or developing units to change.

    MPC5503


    I place an empty jar and deactivate 31000001# 1#
    I'm going to 210900323#1#
    sp address 2109005# I choose the color #ok
    I touch COPY and take out the copies that I calculate are necessary to unload the toner from the unit.
    When I think it's decent, I turn it off, perform general maintenance,
    (transfer, laser, ID, melter, scanner, etc.)


    I leave 3100001#0# again
    I put quality toner.
    I make full music o 3011002#
    then 2111...a,b,c,d...


    exit
    USER TOOLS
    MAINTENANCE...printer calibration, copying, etc.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here