Likes: Good day, i have a Ricoh MP 3055 with a jam in the area of the fuser C. i hsve searched every where in the area but to no avail.
Can anyone shed some light on this ?
Thanks: 0
Dislikes: 0
Good day, i have a Ricoh MP 3055 with a jam in the area of the fuser C. i hsve searched every where in the area but to no avail.
Can anyone shed some light on this ?
Hello
What means "in the area in fuser C"?... Is the paper in the fuser? After the fuser?... Before the fuser?
Inviato dal mio SM-S901B utilizzando Tapatalk
Memento Audere Semper
Check input mode and see what sensor is being triggered.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
you rebooted and still get the error? you updated the firmware and still get the same error?
In your profile you claim to be a "senior tech" but your post sounds more like an end user. What is the Jam number code? It will be in thew form of Jxxx where xxx is a three digit number. That number will tell us exactly which sensor detected the jam and whether it is a lead edge or trail edge jam.
its a "senior user"...LOLOriginally Posted by slimslob
"loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)
Check the the duplex unit (the part above the fuser unit), sometimes a sheet stucks there and it's difficult to see
Inviato dal mio SM-S901B utilizzando Tapatalk
Memento Audere Semper
Reply With Quote
Bookmarks