Originally Posted by
spree
Davel: I bought original parts Ricoh, not maintenance kit, but separatly each spare part:
- OPC drum
- OPC drum blade
- pick-off pawls
- transfer belt
- transfer belt blade
- charge roller apply
- brush roller
- developer (powder)
- developing filters
As I look at this SP 8200 maintenance kit 402960 it is whole PCU assembly and whole developing assembly. This could be a good solution for my problem. Is there developer (powder) inside this maintenance kit or I must it buy separately?
Phil B.: I did not clean nothing - mistake? Drum was clean, cleaning roller clean...
After replacing drum, blade, developer,.... I make exactly this:
1.) Make developer initialization (ID sensor initial setting) SP3001-2,
2.) Grayscale setting SP2810-1
3.) After replacing the charge roller and cleaning roller, I checked the value of SP2001-001 and set SP2001-001 to "1500".
4.) Set the developer lot number (from developer package) - SP2801
5.) * see the mark
*Probably I miss 2805-1 - could be this the problem???
Or I missed something?
Bookmarks