What does its mean sc 122 of Aficio 2060
anybody help!
What does its mean sc 122 of Aficio 2060
anybody help!
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
122 D Scanner home position error 3The scanner home position sensordoes not detect the on conditionduring original scanning.•BCU, SDRB (Scanner Driver Board)defective•Scanner motor defective•Harness between BCU, SDRB, scannermotor disconnected•Scanner HP sensor defective•Harness between scanner HP sensorand BCU disconnected•Scanner wire, timing belt, pulley, carriageinstalled incorrectly.
checked the scanner settings, but this may be fixed by shutting down completely and restarting.
Thank you !
One thing to check is to make sure the set screw that locks the cable pulley to the scanner drive shaft didn't back out or shear off.
SC122
[Cause]
SDRB board is faulty.
[Resolution]
Replace the SCRB board and ground.
AND
SC122 occurs while scanning.
Does not occur when scanning at the same magnification; occurs when copying and enlarging.Answer [Cause]
Scanner motor is faulty.
[Resolution]
Replace scanner motor.
Replace or repair B247-5180
Scanner home position error 3
The scanner home position sensor
does not detect the on condition
during original scanning.
A unit that old, probably a dirty Home Position sensor
Bookmarks