replace NVRAM MPC 2800How to replace new NVRAM MPC 6501 ? and how to download from old NVRAM ?
Thanks: 0
Likes: 0
Dislikes: 0
replace NVRAM MPC 6501
replace NVRAM MPC 2800How to replace new NVRAM MPC 6501 ? and how to download from old NVRAM ?
You arn't asking for troubleshooting advice and I don't normally recommend this but what the hey, you sound like a competent person. Run 5844 to upload the data , remove the old nvram, insert the new one and clear with 5801. then run 5845 to download to the new nvram.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
I have to ask, why do you need to do this? It is always a LAST resort, especially on this model. You can expect all sorts of trouble with false toner out messages and devs going wrong etc etc etc.Originally Posted by tullio
Re: replace NVRAM MPC 6501
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Just so you know.......
Replacing Nvram and moving the data won't reset the electronic counter.
Why do they call it common sense?
If it were common, wouldn't everyone have it?
As mentioned before - NVRAM replacement is the last resort. Check out all harnesses for any damage, electrical connections between boards (controllers) may cause weird issues. Also it's ALWAYS good to have a spare machine you could "borrow" parts from and see if it's going to make any difference...
P.S. DO NOT try to use "used" NVRAM though
Well, these are worse than useless.
This is not an NVRAM issue, it's a harness/connector fault (at a guess.)
Posting Permissions
Reply With Quote
Bookmarks