Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 33
replace photoconductor
I know this is a dumb question, then again i've been told there is no such thing as a dumb question, but here it goes.
How do you reset the "REPLACE PHOTOCONDUCTOR" message on a Savin 3515MF
Thanks for your help in advanced.
-
Re: replace photoconductor
Execute SP7-992-4 in service mode (reset dev counter).
EDIT: Additionally, this machine is the same as the Ricoh AF1515, you could have searched "1515 replace photoconductor" and found a few threads addressing this issue.
Last edited by Athlontini; 01-13-2014 at 03:00 AM.
-
Technician
- Rep Power
- 33
Re: replace photoconductor
Thank you so much Athlontini.
-
Re: replace photoconductor
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
-
Senior Tech
250+ Posts
- Rep Power
- 32
Re: replace photoconductor
Change SP5912 to higher no. usually set at 45 change to 120 by that time the drum will need to be changed anyhow
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks