Ricoh MPC5000 Part Transfer Assembly Holder

[PJF]

Anyone able to help me. My MPC5000 parts manual is outdated it doesn't have the mod parts.

I need to replace Transfer Assembly Holder D0894663 as the locator pin broke, which has been modded to D0894664, but the mod part doesn't have the locator pin. So Im guessing there's another part that needs ordering. Anyone able to shed some light on this ?

[slimslob]

TSB D027/029 - 032

If you have a machine with original Transfer Roller Case, you have to replace the entire assembly. D0256282 Case: AT: Ass'y, D0296288 Case: Transfer Roller, D0894664 Guide Plate: Transfer Unit: Holder, D0894665 Shaft: Holder: Rear, 04583020N Hexagon Head Tapping Screw: 3X10, D0894666 Drum Stay: Front, and 2 each 04583008N Hexagon Head Tapping Screw: 3X8. Once you have replaced everything, in the future you only have replace individual parts should they break again.

[jonbonse]

TSB D027/029 - 032

If you have a machine with original Transfer Roller Case, you have to replace the entire assembly. D0256282 Case: AT: Ass'y, D0296288 Case: Transfer Roller, D0894664 Guide Plate: Transfer Unit: Holder, D0894665 Shaft: Holder: Rear, 04583020N Hexagon Head Tapping Screw: 3X10, D0894666 Drum Stay: Front, and 2 each 04583008N Hexagon Head Tapping Screw: 3X8. Once you have replaced everything, in the future you only have replace individual parts should they break again.

Hey, would you happen to have the TSB for this?

[skynetto]

Here it is.
C5000 mod.pdf

[jonbonse]

Here it is.
C5000 mod.pdf

Thanks!

Does this apply to the C2800/C3300?

[skynetto]

Yep. Same part.

[slimslob]

Here's the North American version of the bulletin;
rfg057345.pdf

[TayTayTheTechnician]

TSB D027/029 - 032

If you have a machine with original Transfer Roller Case, you have to replace the entire assembly. D0256282 Case: AT: Ass'y, D0296288 Case: Transfer Roller, D0894664 Guide Plate: Transfer Unit: Holder, D0894665 Shaft: Holder: Rear, 04583020N Hexagon Head Tapping Screw: 3X10, D0894666 Drum Stay: Front, and 2 each 04583008N Hexagon Head Tapping Screw: 3X8. Once you have replaced everything, in the future you only have replace individual parts should they break again.

There is a kit available too. I'm going to try it out.

Ricoh KIT-C2800 TRC Transfer Roller Case Kit, Genuine (K0054)

[slimslob]

There is a kit available too. I'm going to try it out.

Ricoh KIT-C2800 TRC Transfer Roller Case Kit, Genuine (K0054)

You might be asking for more costs than the kit savings. Follow the bulletin exactly.

[Oze]

You might be asking for more costs than the kit savings. Follow the bulletin exactly.

Fitting the original mod parts is a cheap repair.
Works out to $150(AUD) plus labour.