Quote Originally Posted by Imprestik View Post
Wow this thread escalated quickly LOL.....

I should have updated it years ago but what I eventually found out is you don't even need to use SP5810-002 when you have this code.

Before switching off the device, go to SP3701 (i think it is) and set the fusing unit, belt and pressure roller to 1 to tell the device you are replacing it with a new fuser.

Switch it off and back on and off you go, the device will do process control, reset all fusing codes and fusing PM counters and work like a charm.

In saying this the fuser was also replaced

Never had a problem since
Exactly, basically follow what is says in the service manual.