You might have damaged the sleeve when you "cleaned it". Have never heard of anyone "cleaning a sleeve" before. How did you clean it???
Usually once it starts "ghosting" or tracking the image down the page like that, then it's time to REPLACE the fusing sleeve.
Just replace the sleeve or fusing unit and execute the SP mode I mentioned. It's the ONLY way!
Omertà
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
I did the same nvram backups when i was placing a bunch of mpc3502 in the field.
kept copies on my laptop as i had one machine that would not reset,would no blow the pico fuse either.
I do not do it on the 03 series as the fuser sleeve is more solid and reliable than the 02s
Wow this thread escalated quickly LOL.....
I should have updated it years ago but what I eventually found out is you don't even need to use SP5810-002 when you have this code.
Before switching off the device, go to SP3701 (i think it is) and set the fusing unit, belt and pressure roller to 1 to tell the device you are replacing it with a new fuser.
Switch it off and back on and off you go, the device will do process control, reset all fusing codes and fusing PM counters and work like a charm.
In saying this the fuser was also replaced
Never had a problem since
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks