Hi all
I recently attended an MP C2500 with paper jamming from tray 1. The paper was printing ok then didn't pickup and declared the jam.
The pickup assembly has new rollers on so I swapped tray 1 and 2 pickup assemblies round to see if the fault followed the feed assembly and it did!
I cannot see anything obviously wrong with the pickup assembly and wondered if anyone could shed any light on it?
I would replace the whole feed assembly but if its something small and cheaper, I would prefer that option.
Also, is the pickup feed for the MP C2500 different from the MP C2800? They look identical but the part numbers are different and there is a price difference of £20. . . .
Thanks!
Bookmarks