Light copies MP5002

**izzynut** · 01-30-2015

Originally Posted by izzynut

Any suggestions on a MP5002 with light copies.

Copies only are light, prints and internal prints are good.
This machine was PM just recently with new PCU, Dev restart and fixing rebuild, feeder and optics cleaned.

Tried a scan to email comes out decent so don't think its optical. Tried boosting laser setting to the max and it helps but still light.

Firmware a bit old and will try that next visit.

Attached is a sample of an internal test print and a sky shot, you will notice the difference in CQ from the internal and sky shot. Also an internal print of the meter read and then a copy of that print.

You may notice some white lines, that's just my home scanner and not on the actual prints.
Attachment 27777 Attachment 27778 Attachment 27775 Attachment 27776

A engine clear then re-enter settings seemed to have fixed the issue. Thanks for the suggestions.

**Iowatech** · 01-31-2015

Originally Posted by izzynut

Tried adjusting Gamma and didn't help as for the lines I mentioned it at the bottom of my first post that its just caused by my home scanner and not a copier issue.

Oops, sorry about that.