Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Service Manager 5,000+ Posts
    Ricoh pro 5100c booklet finisher problem

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Ricoh pro 5100c booklet finisher problem

    Quote Originally Posted by jamie@ricohids.co.nz View Post
    Service mode- Peripheral - Extras - Increase Staple and Fold capacity by 30 if I remember. Used it for a slightly larger job with a higher gsm with 0 issues.
    I went through the same issues this "Pro" 5110 is not really a production machine but the salesmen sell it as one!

    Use this SP with caution i've already had to replace the staple unit on the SR4100 booklet maker after only 200k believe it or not most of the booklet staple unit is plastic!

    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  2. #12
    Technician
    Join Date
    Nov 2011
    Location
    Maidstone, Kent
    Posts
    14
    Rep Power
    27

    Re: Ricoh pro 5100c booklet finisher problem

    Quote Originally Posted by jamie@ricohids.co.nz View Post
    Service mode- Peripheral - Extras - Increase Staple and Fold capacity by 30 if I remember. Used it for a slightly larger job with a higher gsm with 0 issues.
    Superstar Jamie

  3. #13
    Technician
    Join Date
    Nov 2019
    Location
    Prince Edward Island
    Posts
    23
    Rep Power
    9

    Re: Ricoh pro 5100c booklet finisher problem

    My SR4100 is not folding in half. It's 1/2 out of position. Is there an adjustment in there that i'm missing

    TIA
    Len

  4. #14
    Retired 10,000+ Posts
    Ricoh pro 5100c booklet finisher problem

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Ricoh pro 5100c booklet finisher problem

    Quote Originally Posted by leonardcahill View Post
    My SR4100 is not folding in half. It's 1/2 out of position. Is there an adjustment in there that i'm missing

    TIA
    Len
    Start a new thread or risk being ignored grave robber.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here