SPC 830 Factory Mode

[AUWI]

Hello
can someone tell me how I come with an SPC830 in the factory mode.
Should make after replacing the HHD SP 5-846-046 but there is not in the technician menu
Thanks for any answer

Yellow 143 than c and c hold
do not go here

[copier tech]

You do not need to format the HDD after replacing.

Simply fit the new drive, power on the machine & it will pop up a message asking "do you want to format the HDD" simply choose yes.

[slimslob]

3.2 ENTERING SP MODES
If The Power is Already On:

Press the "Home" and “Simple screen" keys at the same time for more than 3 seconds, and then press the "User tool" key.

If The Power is Already Off:

Press the "Home" and "Suspend" keys at the same time while turning the main switch on.

BTW SP5846-046 has nothing to do with HDD format and is only needed when both the Admin and Supervisor passwords have been changed.

[AUWI]

Thx