Dislikes:
0
-
Re: 3503 Ethernet Port Not working
Make sure you have swapped a 3503 with another 3503, and not a 3003. The controllers are not interchangable.
Double check that the BCU and controller serial numbers match, including upper-case, if not change it under Factory SP.
-
Senior Tech
250+ Posts
- Rep Power
- 27
Re: 3503 Ethernet Port Not working
Success!! Like i said i figured i was doing something wrong from the start but I swore it's what the manual told me
I had been swapping boards but keeping the original NVRAM with that machine....when i just swapped everything including those NVRAM's after i input the serial number it finally worked.
However now the serial number and counter is displaying as the parts machine i got the boards from....which i could care less about.
Bottom line is the ethernet port is working and i'm back in business! Thanks so much for all your help, i've learned a lot going through this swap...turns out it was a hardware issue after all with that ethernet port.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks