Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Senior Tech 100+ Posts ridgemill's Avatar
    Join Date
    Sep 2017
    Location
    Bristol
    Posts
    140
    Rep Power
    19

    Re: 3503 Ethernet Port Not working

    Make sure you have swapped a 3503 with another 3503, and not a 3003. The controllers are not interchangable.

    Double check that the BCU and controller serial numbers match, including upper-case, if not change it under Factory SP.

  2. #12
    Senior Tech 250+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    493
    Rep Power
    27

    Re: 3503 Ethernet Port Not working

    Success!! Like i said i figured i was doing something wrong from the start but I swore it's what the manual told me

    I had been swapping boards but keeping the original NVRAM with that machine....when i just swapped everything including those NVRAM's after i input the serial number it finally worked.

    However now the serial number and counter is displaying as the parts machine i got the boards from....which i could care less about.

    Bottom line is the ethernet port is working and i'm back in business! Thanks so much for all your help, i've learned a lot going through this swap...turns out it was a hardware issue after all with that ethernet port.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here