Thanks:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Ricoh MP 2851
Hi, im new here, my problem Ricoh printer show many error code such as SC860, SC870, SC872, SC925 this problem occur after i set printing and scanning . and the major problem is number 7 button on printing device isnt work.. so i can't enter SP code 107, my printer connect using switcher Dlink
Last edited by darkravenz; 10-24-2019 at 11:01 AM.
Reason: explain how to connect printer
-
Re: Ricoh MP 2851
Are you using the correct driver and is the cable good?
Clear print queue and install correct driver if you're not using the correct driver.
If you can't get into service mode to format HDD you can always use a PC but that would mean a full format and users would need to be programmed again.
Sent from my WAS-LX1 using Tapatalk
-
Re: Ricoh MP 2851
Replace op panel, or repair it, replace HDD.
-
Re: Ricoh MP 2851
This information should not be in a public forum.
Seriously a 2851 with dud panel and HDD, scrap it and use it for parts.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks