Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Technician
    Join Date
    Nov 2019
    Location
    Accra
    Posts
    15
    Rep Power
    0

    Re: Ricoh Pro C751 - SC590-2 Stepper Motor Error 2

    Quote Originally Posted by Phil B. View Post
    HOW are you checking them? visually? NOT GOOD enough..

    very least you need to know how to read and use a multi/ohm meter.! “ Yes

    do you have a service manual? “ Yes

    can you enter service mode? “ Will consult my Service Manual for it” even though my fiery computer is not linking up to the printer.

    otherwise get off your wallet and Pay a Trained tech!
    yes i know how to use Dvom, I know how to check continuity test , I have service manual but without the point to point diagram. If someone know of a seller who would trade this diagram or schematic, I will pay to get this. Am not a novice here, I work on other brands, is just that am new to this and I won’t be the one to make the machine become more problem.
    Last edited by forumoto; 11-25-2019 at 08:22 AM.

  2. #12
    Senior Tech 100+ Posts
    Ricoh Pro C751 - SC590-2 Stepper Motor Error 2

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    228
    Rep Power
    17

    Re: Ricoh Pro C751 - SC590-2 Stepper Motor Error 2

    did you read the forum rules? you have tried before to ask in the section "requests manual of service" specifying your requirement and perhaps with a minimum of contribution. We always start with the first gear ... and you will get far

  3. #13
    Technician howling's Avatar
    Join Date
    Feb 2019
    Location
    Olongapo
    Posts
    35
    Rep Power
    0

    Re: Ricoh Pro C751 - SC590-2 Stepper Motor Error 2

    actually you dont have to really look at the manual (least for my part) i mean if its a motor check the motor itself visually to know the supplied voltage if its say 24 then check if you have 24 volts supply.... you can at least isolate if you have bad motor or bad supply...and sometimes its written in the pcb if you just spare some time to look for it its actually there written all over the pcb

  4. #14
    Technician
    Join Date
    Nov 2019
    Location
    Accra
    Posts
    15
    Rep Power
    0

    Re: Ricoh Pro C751 - SC590-2 Stepper Motor Error 2

    Quote Originally Posted by GIUBOSS View Post
    did you read the forum rules? you have tried before to ask in the section "requests manual of service" specifying your requirement and perhaps with a minimum of contribution. We always start with the first gear ... and you will get far
    thanks for the proverb, but also knows that before you will see a toad running in a broad day light, you must know that something is running after it��

    infact I have a service manual of 2000 plus pdf pages, but without the point to point diagram
    Last edited by forumoto; 11-25-2019 at 10:18 AM.

  5. #15
    Technician
    Join Date
    Nov 2019
    Location
    Accra
    Posts
    15
    Rep Power
    0

    Re: Ricoh Pro C751 - SC590-2 Stepper Motor Error 2

    Quote Originally Posted by howling View Post
    actually you dont have to really look at the manual (least for my part) i mean if its a motor check the motor itself visually to know the supplied voltage if its say 24 then check if you have 24 volts supply.... you can at least isolate if you have bad motor or bad supply...and sometimes its written in the pcb if you just spare some time to look for it its actually there written all over the pcb

    am grateful for this guideline.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here