Sorry to disturb but what sp modes should I run with a new machine to set it up properly after full assembly...
Sorry to disturb but what sp modes should I run with a new machine to set it up properly after full assembly...
Sad To Say I Don't Have a Life
I do this stuff on the weekends too
Why not just follow the installation instructions in the service manual?
Open SP2963-001 and then touch [Execute]. This initializes toner supply and sets up the auto
process control settings. This will require about 4 min.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
guys don't fuss over your food...!!!
ok... I appreciate the information... from both of you guys...
The reason I asked is that... typically from my experience with ricohs the manual will say one thing but techs do another... so I checked you guys... the grey beards to see if there was anything that I was missing or if the manual was incomplete or any tech bulletins made any changes to the setup process in manual...
again... gentlemen your help is much appreciated and thanks again for both your guidances...
much appreciated...
Sad To Say I Don't Have a Life
I do this stuff on the weekends too
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks