MP 305spf squeaking in the fuser.

[RMC8112]

I have a MP 305 that is squeaking in the fuser. I have replaced the fuser twice within 2k copies, and its squeaking again. has anyone have this issue? Is there anything way to fix it without replacing the fuser?

[slimslob]

Are you sure it is in the fusing unit? I have had new PCU with the cleaning squeaking against the drum.

[RMC8112]

Are you sure it is in the fusing unit? I have had new PCU with the cleaning squeaking against the drum.

Yup I'm sure.

[Phil B.]

Yup I'm sure.

try the fuser(s) in another machine to make sure.

odds that 2 new fusers have the same problem.

[RMC8112]

try the fuser(s) in another machine to make sure.

odds that 2 new fusers have the same problem.

I would but unfortunately there is only one machine inectge office.

[mga]

I would but unfortunately there is only one machine inectge office.

Are you using new oem fusers not refurbished if they are new the problem isn't the fuser.

[Coptech]

usually just the claws squeaking. put a touch of silicon oil on the tips and it rarely comes back. Not so much oil that it goes on copies. Just enough to stop the squeak.

[Zeldaman]

Hi there!
The only series squeaking with the fingers was KIR. Never had this issue with the GRIFFINS. Is there genuine toner in the machine????
Greetings...

[Coptech]

Hi there!
The only series squeaking with the fingers was KIR. Never had this issue with the GRIFFINS. Is there genuine toner in the machine????
Greetings...

Not used to the series names but the model that has been the claw squeaker in my experience is the little black and white 305+.If the thread was about the little color C305, I apologize.

[mga]

Not used to the series names but the model that has been the claw squeaker in my experience is the little black and white 305+.If the thread was about the little color C305, I apologize.

Series names is very common with trained ricoh engineers