Hi...
Got this Aficio MP 2550, it does not power up at all. When I turn on power switch a green light on control panel and a red light on the formmater board comes on. Not a single motor is running, no clicking sound from a relay, its just quite.
Hi...
Got this Aficio MP 2550, it does not power up at all. When I turn on power switch a green light on control panel and a red light on the formmater board comes on. Not a single motor is running, no clicking sound from a relay, its just quite.
If you wait long enough does it eventually code out?
Sounds like a Symptom of SC672.
Check that the MBU board is fully seated on the fax board. Have had this a few times.
Make sure all other options are connected fully (HDD, fax, etc.), you can trouble shoot which one is the problem by unplugging each and rebooting the copier.
Other than that it could be:
Controller board.
IPU board.
BICU board.
Omertà
It may have a bad polygon mirror motor that has taken out the BICU. Try shining a flashlight across the display panel and check if you can read anything like an SC code.
Bin it not worth repairing
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks