Ricoh MPC4503SP Fax settings(RX tone times)

[Juanki]

Good afternoon, I have a problem with the fax configuration on a ricoh mpc4503sp, I can't find where to change the ringtones for fax reception by default it comes configured with 3 and I need to change it to 5 tones, thanks in advance.

Enviado desde mi SM-A315G mediante Tapatalk

[slimslob]

It should be in User Tools - Fax. Look for either parameters. It will not be listed as RX tone times. Try instead something have to do with rings or ring delay. It will possibly be a bit switch setting in the parameter table. You might also be able to set it through WIM.

[Juanki]

It should be in User Tools - Fax. Look for either parameters. It will not be listed as RX tone times. Try instead something have to do with rings or ring delay. It will possibly be a bit switch setting in the parameter table. You might also be able to set it through WIM.

thanks for your help, i found it in the manual, it was a bit swich!

Enviado desde mi SM-A315G mediante Tapatalk

[Polo-022]

Hi Juanki!
Do you mean User Manual, or Service Manual?
It happens to me searching for the same thing these days.

[Gift]

fax SP2-103-007 should do the trick

[Polo-022]

fax SP2-103-007 should do the trick

That's a gift. Thanks a lot!!