Hello everyone ! I did a firmware update on a Ricoh mp301 and now it doesn't work. I turn the power switch on and it's just remains at the "please wait" screen. Any ideas of what that might be ?
Hello everyone ! I did a firmware update on a Ricoh mp301 and now it doesn't work. I turn the power switch on and it's just remains at the "please wait" screen. Any ideas of what that might be ?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
practically if I understand correctly, did you update, and immediately did the problem?
if so, the same thing happened to me on an mpc2004ex a year ago, if you've already done what copier tech says, and it didn't work, try this:
on start-up type [clear] + 1 + 4 + 3 + cancel (5 times), and then try to reload only the "system copy"
i am guessing you know the proper slot to install the firmware update from? though i have never tried it, my understanding is it can cause issues if not done in the proper way. that was one of the first things i learned as a ricoh tech.
Bookmarks