Paper wrinkle on left side

[Phil B.]

Hi sir, thank you for your response. I think wrinkle problem because of the fusing unit. Because i use the other fusing unit in the same machine no wrinkle problem comes. When i use the fusing unit that prepared by me the wrinkle problem coming.

If you bought a complete unit, I would contact the folks that put it together.
If you did, a good learning lesson.

Sent from my SM-G960U using Tapatalk

[slimslob]

measure the distance of the screw to nut on the good unit.

Than adjust the one thats having the problem as close as you can.

What screw to what nut? There is no adjustment. When you don't know the model and have never work on them, don't make a fool of yourself. At the least you should check such things as the service manual and parts catalog before you post.

[GIUBOSS]

Damp paper?

[mikadonovan]

Since it only happened after you worked on it, just go ahead and disassemble it again. Reassemble paying attention to the details. We all have had to do this at one time or another, and you will likely discover what the malfunction is.