Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    Apr 2023
    Location
    Tavira
    Posts
    6
    Rep Power
    0

    Papercut Removal - SC637-01

    Hello !

    When I removed Papercut from every Ricoh machine, I encountered the following issues:


    1. The machine slowed down significantly.
    2. I received error messages.
    3. I was unable to log in for up to 15 minutes.
    4. When I tried to print, I got the error code SC637-01.


    To resolve these issues, I attempted to clean the VRAM. However, the hardware department advised against doing this as it may delete the machine's parameters and cause further problems.

    Any advice/help ?

  2. #2
    Printer firmware is !&$! 100+ Posts
    Join Date
    Mar 2021
    Location
    London
    Posts
    123
    Rep Power
    16

    Re: Papercut Removal - SC637-01

    Quote Originally Posted by SAW1L View Post
    Hello !

    When I removed Papercut from every Ricoh machine, I encountered the following issues:


    1. The machine slowed down significantly.
    2. I received error messages.
    3. I was unable to log in for up to 15 minutes.
    4. When I tried to print, I got the error code SC637-01.


    To resolve these issues, I attempted to clean the VRAM. However, the hardware department advised against doing this as it may delete the machine's parameters and cause further problems.

    Any advice/help ?
    Just do a system rebuild.

  3. #3
    Trusted Tech 50+ Posts
    Papercut Removal - SC637-01


    Join Date
    Feb 2021
    Location
    Gurgaon, Haryana
    Posts
    87
    Rep Power
    7

    Re: Papercut Removal - SC637-01

    Quote Originally Posted by SAW1L View Post
    Hello !

    When I removed Papercut from every Ricoh machine, I encountered the following issues:


    1. The machine slowed down significantly.
    2. I received error messages.
    3. I was unable to log in for up to 15 minutes.
    4. When I tried to print, I got the error code SC637-01.


    To resolve these issues, I attempted to clean the VRAM. However, the hardware department advised against doing this as it may delete the machine's parameters and cause further problems.

    Any advice/help ?
    Please update:

    1) Which device are your referring to,
    2) Have you checked the application removal in the WIM,
    3) Would you want the Papercut to reinstalled to connect to the papercut server.

    you could try and disable the java in the SP mode.

    I hope it helps.

  4. #4
    Technician
    Join Date
    Oct 2011
    Posts
    27
    Rep Power
    32

    Re: Papercut Removal - SC637-01

    From the description of the fault, I am assuming you are using the SmartSDK version of the PaperCut embedded.

    Blunt answer, follow the instructions to install PaperCut from the embedded manual Chapter 7.1.1 or 7.1.2 depending if you are doing it with the RoC tool or manually.

    But the main step you are missing is changing the SP mode settings:

    Code:
    Set the Access Control > SDK Certification Device > bit 0 to 0.
    Set the MF KeyCard > Job Permit Setting to 0
    If PaperCut is the older embedded running on the controller. e.g. SDK/J then the main thing would be to ensure
    Code:
    Set the Optional Counter Type > External Optional Counter Type to 0.

  5. #5
    Junior Member
    Join Date
    Dec 2023
    Location
    Bologna (BO)
    Posts
    4
    Rep Power
    0

    Re: Papercut Removal - SC637-01

    Quote Originally Posted by MrFred View Post
    From the description of the fault, I am assuming you are using the SmartSDK version of the PaperCut embedded.

    Blunt answer, follow the instructions to install PaperCut from the embedded manual Chapter 7.1.1 or 7.1.2 depending if you are doing it with the RoC tool or manually.

    But the main step you are missing is changing the SP mode settings:

    Code:
    Set the Access Control > SDK Certification Device > bit 0 to 0.
    Set the MF KeyCard > Job Permit Setting to 0
    If PaperCut is the older embedded running on the controller. e.g. SDK/J then the main thing would be to ensure
    Code:
    Set the Optional Counter Type > External Optional Counter Type to 0.
    Hello, I'am in the same situation, when remove papercut from my device teh same error.
    I don't understand waht you means with settisg SDK Certification Device.

    Can you explain me in detail?

    Thank you in advance for your patience and collaboration.

  6. #6
    Technician
    Join Date
    Sep 2008
    Location
    AUBENAS
    Posts
    11
    Rep Power
    32

    Re: Papercut Removal - SC637-01

    Take a look at this post disabling Paper Cut and especially the solution done by Lagonda. it helps me several times.
    Hope this helps.

  7. #7
    Technician
    Join Date
    Sep 2008
    Location
    AUBENAS
    Posts
    11
    Rep Power
    32

    Re: Papercut Removal - SC637-01

    Sorry, see the solution done by mincopier.

  8. #8
    Service Manager 5,000+ Posts
    Papercut Removal - SC637-01

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,474
    Rep Power
    180

    Re: Papercut Removal - SC637-01

    Try this solution.

    User Tools > System Settings:

    1. Login to User and Authentication Management > set to "OFF"
    2. Machine action when limit is reached > set to "Allow Continue Use"
    3. Enhanced Print Volume Use Limitation > Tracking Permission & Stop Printing > set to "OFF"
    4. Auto Delete User in Address Book > set to "OFF"
    5. SP-5-401-230 > set to Initial (00H)


    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  9. #9
    Junior Member
    Join Date
    Dec 2023
    Location
    Bologna (BO)
    Posts
    4
    Rep Power
    0

    Re: Papercut Removal - SC637-01

    Quote Originally Posted by copier tech View Post
    Try this solution.

    User Tools > System Settings:

    1. Login to User and Authentication Management > set to "OFF"
    2. Machine action when limit is reached > set to "Allow Continue Use"
    3. Enhanced Print Volume Use Limitation > Tracking Permission & Stop Printing > set to "OFF"
    4. Auto Delete User in Address Book > set to "OFF"
    5. SP-5-401-230 > set to Initial (00H)


    Working perfectly! Thank you!!

  10. #10
    Service Manager 5,000+ Posts
    Papercut Removal - SC637-01

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,474
    Rep Power
    180

    Re: Papercut Removal - SC637-01

    Quote Originally Posted by pow3r77 View Post
    Working perfectly! Thank you!!

    No problem, we had the same issue just a few weeks ago so I kept notes for future reference!
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here